NLIS Complaint Form

Animal Identification

Animal Identification

All animals leaving a property (PIC) must be identified with an NLIS approved device before moving unless there is a specific exemption or a permit is obtained from the state or territory authority   

If  you are moving an animal off its property of birth, you must tag the animal with an NLIS approved  breeder device  (white for cattle, yellow or 'year of birth colour' for sheep and goats). 
 
Once an animal has been identified, the tag or device should remain with the animal for life.  If a device is lost or stops working, and the animal is no longer on its property of birth an NLIS accredited  post-breeder device  (orange for cattle, pink for sheep or goats) must be applied.   
 
It is an offence to remove an NLIS device from an animal and apply another.  Check with your  state/territory NLIS authority  for how to deal with non-functioning NLIS devices in your jurisdiction. 
 
If you have any issues with your NLIS approved devices please contact your supplier. You may also lodge a complaint with ISC for cattle, sheep and goat devices.

 

Identification requirements for cattle

The NLIS approved cattle identification list is available here NLIS Approved Identification for Cattle.   

NLIS approved devices for cattle must be electronic (RFID). This can be either a single ear tag, or a rumen bolus/visual ear tag combination. 
 
All cattle must be identified with an NLIS approved identification device before being moved off a property. Find out more about the requirements here: NLIS AIT Requirements.

Identification requirements for sheep and goats

The NLIS approved sheep and goat identification list is available here NLIS Approved Identification Sheep & Goats.

Australia is transitioning to the electronic identification of sheep and goats nationally. It is already mandatory is Victoria and will be mandatory for lambs and kids born from 1 January 2025. Refer to the Sheep & Goat eID page for full details.  
 
All sheep and managed goats must be identified with an NLIS approved identification device before being moved off a property. Find out more about the requirements here: NLIS AIT Requirements.

Applicators and scanners

ISC approves the applicator in conjunction with the animal identification but does not approve equipment such as readers or scanners. All electronic animal identification containing a RFID must be readable by commercially available handheld and panel readers which operate within the bandwidths defined in AS5019-2001.

 
 
 
 
 

Tagging requirements for sheep and goats

Sheep and goats can only be identified by ear tags/devices and must be tagged with an NLIS-accredited tag or device before being moved off a PIC.  

In all states except Victoria, NLIS accredited devices for sheep and goats can be either an electronic (RFID) device or a visual (NLISID) tag. In Victoria, all lambs or kids born since 1 January 2017 must be fitted with individual RFID tags before they leave their PIC of birth.

Some tagging exemptions are in place for rangeland goats harvested from the wild and dairy goats in some states and territories. Check with your state/territory NLIS authority for more information.

Post-breeder devices may be applied to sheep or goats when moving mobs that include non-vendor bred animals. Refer to your movement documentation (e.g. NVD) for details.

For more information about NLIS accredited sheep and goat devices, see our Accredited Devices List for Sheep and Goats and the FAQ What is an (electronic) RFID? What is a (visual) NLISID?

NEW table.png blobid3.png

NLIS tags and obtaining a PIC

If you need to purchase NLIS tags/devices or obtain a PIC, you will need to contact your state or territory authority.

Your local authority will also be able to assist with clarifying livestock movement and NLIS compliance requirements.

Variation between states and territories requires producers to be aware of what applies in their situation, especially when moving livestock across borders.

Access state and territory contact details

image

Need NLIS Technical Support? 

If you're receiving warning emails, having issues with the NLIS database or are having trouble logging in, check out the support information available.

Read More

image

FAQs

An electronic Radio Frequency Identification Device (RFID) has both an NLISID and an RFID number. Both numbers can be used to individually identify animals on your property. When you buy NLIS devices for your PIC, the device manufacturer registers the NLISID and RFID numbers on the database, so when you use the database, you can enter either the NLISID or the RFID associated with a specific animal.

An NLISID number is printed on the outside of an electronic ear tag, or on a visual ear tag indicating a rumen bolus was applied (cattle only). An NLISID number can only be read visually by looking at the number on the device on a tagged animal. The first eight characters of an NLISID are the PIC the device was issued to (see example below).

An RFID number is assigned to the electronic RFID chip inside a device. An RFID number can only be read electronically, when animals are scanned with a tag reader.

Livestock should be tagged so that the tag is applied in the middle of the animal's ear, in accordance with the tag manufacturer's instructions.

A correctly applied cattle tag should be applied to the animal's right ear, as shown below: 

A correctly applied sheep tag should usually be applied to the animal's left ear, as shown below. Please refer to your state/territory NLIS authority for any other specific requirements. 

All animals leaving a property (PIC) must be identified with an NLIS accredited device before moving unless a permit is obtained from the state or territory authority. More information on tagging requirements for cattle, sheep and goats is available on the ISC website.

You do not need to notify NLIS when you tag an animal on your property. The NLIS database does not distinguish between tags applied to your animals and tags that are still unused. All devices are automatically registered to your PIC by the tag manufacturer when they are issued to you.

It can be useful to keep your own records of what tags are used, when and in what animals. ISC recommends keeping a record of the tag numbers when purchased and to which animals they have been applied. Visual ID numbers are printed on the bag for easy recording.

 

 

 

 

For an RFID tag to obtain full NLIS accreditation, it must complete a three-year field trial on several different properties across Australia and demonstrate loss rates across all trial properties below 3.5%.

If any producer is experiencing high tag loss rates then you are urged to contact the tag manufacturer directly and notify them of the problem. If you are unhappy with the manufacturer’s response to their problem, then a complaint can be lodged with ISC and we will further investigate the matter.

Complaints can be submitted via this NLIS Device Complaint Form or by phoning the ISC Helpdesk on 1800 683 111.

You can use either visual NLIS ID numbers or electronic RFID numbers to record a livestock movement.

Livestock movements with electronic tags – or RFID tags – should be recorded using the Livestock moved onto/off my property function. Access ISC's NLIS how-to guide for moving livestock onto or off a PIC (type in details) or how-to guide to moving livestock onto or off a PIC (file upload) for assistance with this.

Livestock movements with visual tags should be recorded using the mob-based movement onto/off my property function. Access ISC's NLIS how-to guide for moving mobs onto or off a PIC (type in details) or how to guide to moving mobs onto or off a PIC (file upload) for assistance with this. 

For information regarding the tagging of EU cattle, please contact European Union Cattle Accreditation Scheme on 1800 305 544 (available Monday to Friday 8am to 4pm) for more information.

For more information on pig tags for NLIS, visit pigpass.australianpork.com.au/faq and then look for the identification tab.

Electronic tags will need to be read manually or by using a scanner or a wand. If you don’t have one, you can ask to hire or borrow one from an agent.

If you’re having difficulty reading an animal’s tag number and it is electronically tagged, use a wand or employ an agent to assist. You may also be able to put the animal into a crush if there is one available to assist you in reading the tag.

Alternatively, the previous owner of the animal may have a record of the animal’s tag number. If you can at least obtain the unique last five digits of the animal’s tag number and have the previous owner’s PIC, the ISC Helpdesk may be able to help you work out the animal's full tag number using this information.